E266UP DRAGON266U linier busa karét mesin suntik molding
Rujukan Téknis
| kapang-Panyekel | N° | 2 | 6 | 8 | 10 | ||||
| kapang CLAMPING gaya | KN | 2000 | ||||
| kapang bubuka stroke | mm | 350 | ||||
| DIMENSI PLAT PANAS | mm | 580x550 | ||||
| Jangkungna kapang standar | mm | 105-330 | ||||
| Jangkungna suntik | mm | 60 | ||||
| PASSAGGE BE1WEEN COLUNS | mm | 605 | ||||
| JARAK ANTARA PUSAT INJEKSI | mm | 240/290 | ||||
| PIRING kakuatan pemanasan | KW | 6, 7 | ||||
| UNIT INJEKSI | ||||||
| JUMLAH UNIT INJEKSI | N° Nyaéta | 2 (1 per vers.2 staz.) | PILIHAN | |||
| DIAMETER SCREW | mm | 60 | 75 | |||
| L / D SCREW L / DDELA VIS | — | 19 | ||||
| VOLUME nyuntik | cm | 900 | 1400 | |||
| TEKANAN INJEKSI | Bar | 1065 | ||||
| KECEPATAN SCREW | rpm | 0-140 | 0 + 140 | |||
| Laju suntik | cm3/detik | 230 | 700 | |||
| TOrsi SCREW (maks) | DaNm | 160 | 160 | |||
| zona pemanasan | N° | 4 | 4 | |||
| POWER dipasang | ||||||
| Unit suntik pemanasan | KW | 10.5 | 10.5 | 10.5 | 10.5 | |
| MOTOR GERAK INJECTOR | KW | 1.5 | 1.5 | 1.5 | 1.5 | |
| Piring dipanaskeun | KW | 26.8 | 80.4 | 107.2 | 134 | |
| HIDROLIK UNIT MOTOR | KW | 48.6 | 48.6 | 48.6 | 48.6 | |
| Pompa vakum | KW | 2.2 | 2.2 | 2.2 | 2.2 | |
| TOTAL dipasang kakuatan | KW | 89.6 | 143.2 | 170 | 196.8 | |
| KONSUMSI RATA-RATA | ||||||
| ENERGI LISTRIK | kWh | 20 | 44 | 55 | 76 | |
| AIR | NL/min | 100 | 100 | 100 | 100 | |
| UNIT REFRIGERATION | frig / h Frig | 16000 | 21000 | 27000 | 30000 | |
| beurat | ||||||
| BEURAT BERSIH | Kg | 12600 | 23600 | 29044 | 34600 | |
| DIMENSI | ||||||
| A-JARA | mm | 4500 | ||||
| B-PANJANG | mm | 4660 | 8500 | 10420 | 12340 | |
| C-Stasiun PANJANG | mm | 1920 | 5760 | 7680 | 9600 | |
| H-luhureun | mm | 2800 | ||||
Tulis pesen anjeun di dieu sareng kirimkeun ka kami